Paxton Net2 I/O board Bedienungsanleitung PDF herunterladen

Ins-30019 Net2 I/O board

20/08/2012

Output 1

12V DC

Power Inputs

Reader 2Reader 1

Red

Brown

Orange

Green

Yellow

Blue

Mauve

Black

Red

Brown

Orange

Green

Yellow

Blue

Mauve

Black

Relay 1 Relay 2 Relay 3 Relay 4

Input 1

Input 2

Input 3

Input 4

Output 2

Output 3

Output 4

Input terminal (FOR FUTURE USE)

Patch lead

Diagnostic LED's

Net2 I/O Boards are congured to switch their relays by setting up a 'Triggers and Actions' rules.

Four inputs are provided to allow connection to door contacts, etc, without the need of a Net2 ACU.

Four output relays are also provided to switch a variety of AC and DC output devices. The relay

contacts are rated at 13A at 240V AC, to enable mains voltages to be switched.

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

The I/O board is a Network based product and requires connection to the PC via a TCP/IP connection.

This unit requires the controlling PC to be running Net2 v4 software.

- 3V Power LED

- 5V Power LED

- OK LED - This should ash regularly

- 100 M - On = 100 Mbit/s : Off = 10 Mbit/s

- Link - The I/O board is connected to a Network port

- Data - The I/O board is receiving ethernet data

Diagnostic LED's

[email protected]

Paxton

1 2 3 4 5 6 7

Inhaltsverzeichnis

Seite 1 - 01273 811011

Ins-30019 Net2 I/O board20/08/2012Output 112V DC Power Inputs Reader 2Reader 1RedBrownOrangeGreenYellowBlueMauveBlackRedBrownOrangeGreenYellowBlueMauv

Seite 2 - Detection of the I/O boards

Select 'I/O boards' in the left hand tree diagram.To enable the 'I/O board' icon, the 'Triggers & Actions' icon need

Seite 3

I/O boards that have been detected will be displayed with their MAC address.Double click on an entry and it will bring up its conguration screen. Th

Seite 4 - Firmware download

If the I/O board is connected to a dierent IP range to the PC, it will not be detected. You must therefore make a manual entry in the I/O table so t

Seite 5 - Inputs and Outputs

Inputs and Outputs Simply double click on an entry to rename the item and click Apply. These names will be used in any 'Triggers and Actions&apos

Seite 6 - Triggers and Actions

The basic control of an I/O board is provided by 'Triggers and Actions'.An air conditioner can be turned on remotely by the presentation of

Seite 7 - Safety Requirements

Only qualied Engineers should install and service this equipment.Read the instructions before installing and powering the equipment. Adhere to all in

Kommentare zu diesen Handbüchern

Keine Kommentare

Paxton Net2 I/O board Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Paxton Net2 I/O board herunter. Paxton Net2 I/O board User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Paxton Net2 I/O board