Paxton Net2 485 TCP/IP Ethernet interface (Rev4) Bedienungsanleitung PDF herunterladen

Page 1

0V12V

Green

White/Green

Screen or spare cores from

network cable

White/O rang e

Orang e

KR 1redae dap

e 1

R le ay 2

R le ay 1

Keypad 2 Reader 2

stupnI

P ewo r

nidocelbac5T g

krowteN

Net2 classic

Red 12V dc

Red LED

Amber LED

Green LED

Data/D0

Clock/D1

Media Detect

0V out

Load

Data

Clock

R c

dV21de

R DELde

DELrebm

DELnee

/ataD

1D/kcolC

tceteDa

ideM

tuo

daoL

ataD

kcolC

+12V

:noit

uaC

o ylnosre

erc

dV2

. F tcerrocro

noitcennoc fo f

rsredaerV

5dlo re ot

sno

itcurt

sni

PLACE SERIAL

NUMBER

LABEL HERE

http://paxton.info/107

123456

0889

Reset to DHCP

mode

Unswitched

fused spur

To next ACU

The interface plugs directly

into the TCP/IP Ethernet

network via a standard

RJ45 connection box.

Switchable 120 ohm

resistors

To reset the unit to DHCP, power up with

the reset button held down until the unit

beeps. The interface is now fully reset

and will now operate in DHCP mode.

Ins-30001 Net2 485 TCP/IP Ethernet interface (Rev4)

Fitting

29/06/2011

Suitability

**IMPORTANT - THIS IS A NETWORK DEVICE**

Please contact your IT Administrator before installing this product

DHCP compatible

(xed IP recommended)

Connect over LAN, WAN or VPN

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011 [email protected]

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

**IMPORTANT**

Apply power to the unit after connecting

the RJ45 plug to a network point.

This device requires Net2 v4.07 or later to operate.

Earlier Net2 software is not compatible with this unit.

If your PC can only support Net2 v3 software, please

contact Technical Support for further advice.

1. Power (Green) - 12V power LED.

2. Termination (Red) - The on-board resistors are in place across the RS485 data pairs.

3. Rx (Red) - The interface is receiving data (RS485).

4. Tx (Green) - The interface is sending data (RS485).

5. Server Connected (Green) - The TCP/IP interface is communicating with the PC Net2 server.

6. Server Link Green = 100 Mbit/s : Orange = 10 Mbit/s (TCP/IP speed).

LED indications

Paxton

1 2 3 4

Inhaltsverzeichnis

Seite 1 - LED indications

Page 10V12VGreenWhite/Green1Screen or spare cores from network cableWhite/O rang e3Orang e4KR 1redae dapye 1R le ay 2R le ay 1Keypad 2 Reader 2stupnIP

Seite 2

Page 20V12VGreenWhite/Green1Screen or spare cores from network cableWhite/O r ange3Orang e4KR 1 redae dapye 1R le ay 2 R le ay 1Keypad 2 Reader 2stup

Seite 3 - When connecting to a LAN

Page 3When connecting to a LANThe IP address should be assigned a xed value, or should be given a DHCP reservation. Unreserved IP addresses issued b

Seite 4 - Specications

Page 4If you still cannot detect the MAC address of the device, call our Technical Support Help line.Connecting to a WAN or different subnet maskIf yo

Kommentare zu diesen Handbüchern

Keine Kommentare

Paxton Net2 485 TCP/IP Ethernet interface (Rev4) Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Paxton Net2 485 TCP/IP Ethernet interface (Rev4) herunter. Paxton Net2 485 TCP/IP Ethernet interface (Rev4) User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Paxton Net2 485 TCP/IP Ethernet interface (Rev4)