Paxton PROXIMITY LCD reader Bedienungsanleitung PDF herunterladen

Page 1

11/01/2011

Fitting

The LCD display is best positioned at eye level for

ease of reading.

It is mounted using the backplate and xings

provided and can be positioned to allow the display

of portrait or landscape images.

Fix the mounting plate to the wall, noting the

position of the orientation arrow (see diagram).

Make a hole in the wall to take the reader cable and

feed this through. Ensure there will be sufcient

slack to allow the reader to slide over the mounting

plate during installation.

Image display

The unit comes with four preloaded images. These relate to the 3 LED's (Green, Amber and Red) on a

standard Paxton reader plus a default image.

Once a token has been read, the control unit establishes the access permissions of that user. Access is

granted or denied as appropriate with the designated image displayed. For example, if access is denied

the image assigned could show "Please return to Reception".

Present the reader to the mounting plate so that the slots pass over the side tabs in the plate.

Slide the reader down the plate until the retaining pin clicks into position.

A tool is provided with the reader to depress this pin should the reader ever need to be removed.

The full colour backlit LCD screen can be congured to display images

of the customer's choice. For example, an image using a company

name/logo could be used as the default display on each reader around

the site.

The reader comes with four preloaded images. These can be replaced

using a free uploader program available from our website via any

Net2Air USB bridge or a Net2Air USB dongle.

If you wish to update these images, you should ensure that you have a

suitable Net2Air device as one is NOT supplied with the reader.

Readers mounted together

between readers

300 mm

Mounted on metal surface

Suitability

Security-sensitive doors

Wet environments

Ins-30091 PROXIMITY LCD reader

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011 [email protected]

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Paxton

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - Technical Support

Page 111/01/2011FittingThe LCD display is best positioned at eye level for ease of reading.It is mounted using the backplate and xings provided and c

Seite 2 - Connection modules

Page 2Cable extensionsRRReaders can be extended using Belden CR9540 10-core overall screened cable to a maximum of 100 metres.WiringThe reader port mo

Seite 3 - Image orientation check

Page 3The metal backplate is marked with an arrow. Select a 'Rotation' option to turn the green arrow into the same direction as the backp

Seite 4 - Image selection

Page 4The LCD reader will hold 4 images. These are selected automatically by the reader's LED control wires. The 'Present token' imag

Seite 5

Page 5Select the LCD reader from the list of units detected and check that the image type is the correct one to be updated.Check that the image orient

Seite 6 - Factory reset

Page 6-20 °C +55 °C IPX710V DC 14V DC 165 mA 215 mA125 kHz600 µs68 mm 109 mm22 mm40 mm 30 mm400 mmThe declaration of conformity is available on reque

Kommentare zu diesen Handbüchern

Keine Kommentare

Paxton PROXIMITY LCD reader Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Paxton PROXIMITY LCD reader herunter. Paxton PROXIMITY LCD reader User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Paxton PROXIMITY LCD reader