Paxton PROXIMITY architectural reader Bedienungsanleitung PDF herunterladen

Ins-30040 PROXIMITY architectural reader

14/03/2011

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011 [email protected]

Fitting

The reader insert is held against the backplate by an outer

decorative bezel secured with 4 small screws. Remove these

screws to release the bezel and ret after adding the insert.

If you have made an insert of less than 5 mm thick, this can

still be tted by using the 3 nylon screws supplied in the

tting kit to hold the insert against the bezel. (see diagram)

To remove the reader, insert the

tool provided into the cut out

on the underside of the reader.

Push up the clip and pull the

reader from the backbox.

Reader insert

Removing the reader

Ensure that the backbox is mounted vertically and is

square with the wall surface.

Care must be taken when doing this, as no further 'twist'

adjustment is possible within the reader mountings.

Line up the two locating pins on the top of the

reader with the top plate inside the backbox.

Once located, the reader can be clipped into the

box at the bottom using the clip feature.

Check that the reader is located against the

surface of the wall. If there is a gap between

the reader and the wall, or if the reader will

not successfully clip into the box, remove the

reader and adjust the mounting plates inside the

backbox using a 3 mm Allen key.

Mounting the reader

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Paxton

1 2 3 4

Inhaltsverzeichnis

Seite 1

Ins-30040 PROXIMITY architectural reader 14/03/2011Technical SupportTechnical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Seite 2 - Connection modules

Cable extensionsReaders can be extended using Belden CR9540 10-core overall screened cable to a maximum of 100 metres.WiringIMPORTANT: This reader ca

Seite 3 - Suitability

1 - Readers/Keypads not working.Q- Software settings - Conrm that the settings of the reader or keypad are correct. Q- Connections - Check the wiring

Seite 4 - Contents in box

10V DC 14V DC140 mA125 kHz600 µs -20 °C +55 °C IPX770 mm 110 mm10 mm60 mm 100 mm25 mm40 mm 25 mm400 mmThe declaration of conformity is available on re

Kommentare zu diesen Handbüchern

Keine Kommentare

Paxton PROXIMITY architectural reader Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Paxton PROXIMITY architectural reader herunter. Paxton PROXIMITY architectural reader User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Paxton PROXIMITY architectural reader